Inspection Checklist
PIONEER SERVICE AUTHORISATION CODE
Enter your Serviceman's Authorisation Code to proceed. If you don't have one, go to https://form.jotform.com/250566823411858
Inspection Date
*
-
Day
-
Month
Year
Today's Date
Serviceman:
*
Email
A copy of this form will be emailed
Customer
*
Where is the machine?
Site Contact:
*
Site Contact Name and/or number
Machine
*
Please Select
Presto SP/SPN Auger Compactor
Presto Hydraulic Compactor
HSM V-Press 605
HSM V-Press 818
HSM V-Press 860
HSM V-Press 1160
HSM C400/425
Simpro Lifter
MacFab
Other
Select the brand of machine
Serial Number
*
Machine Serial Number
Hours (if available)
Enter the machine hours if they are available. HSM machines: go to real vals in the menu. Presto Machines, use Prestogo app
Bales / Empties (if applicable)
Enter the number of bales or empties, if available. HSM machines: go to real vals in the menu. Presto Machines, use Prestogo app
Last Service
*
-
Day
-
Month
Year
Date
Next Scheduled Service
*
-
Day
-
Month
Year
Date
General:
*
Yes
No - See Notes
General Condition OK
Guards all in place and in good condtiion
Machine Operates Normally
Has a Service Dates Label attached
Has a Service Callout QR Label attached
Electrical:
*
Yes
No - See Notes
N/A
Mains Plug & Lead OK
Lockable Isolator Available
Emergency Stop and any Door Interlocks work
Electrical cabinet in good condition
Components (sensors/wires/actuators) all OK
Presto SP/SPN Tasks:
*
Yes
No - See Notes
Check Grease Dispenser Full (if fitted)
Lubricate Turnbuckles and Bin Hooks
Clear out any shredded debris from Nooks & Crannies
Check Machine is Online via PrestoWeb
Grease Bin Door Hinges
Reset the Service Interval via the Service Tool Software
Presto Hydraulic Balers & Compactors
*
Done
Not Done - See Notes
Oil Level Checked
Grease Points Done
Check Doors & Guards all in good condition
Specific Service Tasks for this Machine done
Check the Stocks of Tiewire are Adequate
HSM Tasks
*
Done
Not Done - See Notes
Go to Real Vals and record Hours, Bales
Grease the Hinges
Grease the Guide Tubes
Lubricate Door Spinner
Check the Door Latch and Lubricate
Check Door Switch and Flag
Check & Lube Door Release Mechanism
Check Oil Level & Condition
Check & Straighten Wire Pins
Clean Out Wire Slots
Clean Inclination Sensor
Check and Adjust Sensor Flags (Both!)
Replace Guide Tube Bolts, and torque to 195NM (V818 & up)
Check the Stocks of Tiewire are Adequate
Simpro Tasks:
*
Yes
No - See Notes
Hydraulic Oil Level Checked
Door Interlocks Working and Not Bypassed
Chains Lubricated with Silicone NOT OIL!
Cradle Lubrication Points Done
Upper Travel Limit Switch Works
Buttons Are in Good Condition
MacFab Tasks:
*
Yes
No - See Notes
Times out and stops as expected
Won't operate normally with door open
Eject Works - with Door well open
Hydraulic Oil Level Checked
Door Hinges Greased
Door Locks / Latches Greased
Doors are easy to open and not floppy
Transport Bung removed from Oil Filler Cap
HSM C400 Tasks:
*
Done
Not Done - See Notes
Check the Machine Operates in Both Directions
Check the Guide is Present and Locks in Place Properly
Remove Top Cover and Vacuum Buildup Out
Remove the Front Cover and Vacuum Buildup Out
Check the Motor/Gears Sound Good and No Clunking or Unusual Noises
Remove the Shaft Sensor from it's Clip, Clean the Magnet Disc and Reassemble
Comments, Details or Notes
*
Enter any observations not covered by the basic checklist items, or a comment about the machine in general
File Upload: Photos/Videos
Browse Files
Drag and drop files here
Choose a file
Attach any photos or similar
Cancel
of
Submit
Should be Empty: